Outside Iowa: Mid-Season Outboard Maintenance
After a long summer of boating and fishing, and with hunting season official kicked off, don’t forget about some important TLC for what gets you around the lake. It is especially hard for me to think about fishing or fishing duties this time of year, but these days an ounce of prevention is worth a pound of cure they say. In other words preventative maintenance will save you money.
In a few weeks we will talk about the proper steps that need to be taken to winterize your rig for storage. But, now it could be vital to the longevity of your outboard’s life to double check a few items and replace what needs to be replaced. Wear and tear is inevitable with motors, but if you can catch a problem early enough it could save you a hefty repair bill.
It starts with a thorough trailer walk-around double-checking the lights and connectors, wheel hubs, tie-down straps and nuts and bolts holding anything together. Also make sure the jack and hitch are adequately lubricated and operating properly. If you are mechanically savvy (unlike me) make sure your spark plugs are not overly corroded, gapped correctly and that you have sufficient spark.
If you do not feel comfortable with this side of things, I strongly urge you to have a professional look at it. Again, an ounce of prevention.
“Midseason maintenance is crucial,” says Iowan and professional walleye angler, Tommy Skarlis. “Ideally, double checking mechanical aspects of your outboard should take place every time you run a tank or two of gas through it. Closely inspect the prop on your big motor, kicker motor and trolling motor for tangled fishing line. This is especially important as the line forces the motor to work harder than necessary, which over a period of time will damage your lower unit seal.
“As often as you think about it, you should check your lower unit lube,” the Evinrude Pro continues. “Dirty lower unit lube is an indicator that it needs to be changed or something else may be occurring. If you notice discolored lube or metal shavings present - that should tell you to have it professionally inspected. It could mean a water pump is going out or a seal is leaking, but if you catch it early enough, you aren’t as likely have a giant repair bill before hunting season takes priority.”
“Finally, make sure you are running the freshest gas possible,” Skarlis explains. “Old gas and oil will foul plugs and carbs faster than anything. If you are planning on putting the boat away for the year, it is important to run all the gas out of the motor or additional negative impacts could take place.”
Perhaps you might think you’re done for the year but not sure, if you have a free afternoon, take the rig out for one final spin of the year to make sure everything is in fine working order. Again, an ounce of prevention.”
Skarlis runs Evinrude motors and those motors do not require any scheduled maintenance for the first three years. Regardless he has created a checklist that he follows religiously after each tournament to assure the motor’s proper working order. Taking care of what you have now might allow you save money for a future investment or an upgrade.
Maintenance is far cheaper than a giant, unexpected repair bill. Trust me on this; I have learned this lesson the hard way many times over.
Far more enjoyment will be had for a longer period of time if you keep up to date on what your boat and motor need to remain “healthy.” Not to mention, it will afford more time on the water and that’s what we’re all after anyway!
Good luck and don’t hesitate to contact me with any questions or comments.
Live it Up!
Thomas resides with his wife and two children in Guthrie Center, Iowa. He is a professional outdoor writer, photographer, videographer, and outdoor talk radio show host; for more information visit www.outdoorpursuitsradio.com. If you have questions or comments feel free to email Thomas at tha481@gmail.com
